2017 DEERE 1612DE at www.martinequipment.com2017 DEERE 1612DE at www.martinequipment.com
All
Photos
Videos

For Sale Price:Call

Description

The 1612DE Ejector Scraper is a four-tire scraper that carries 12.2 m3 (16.0 cu. yd.) of material and has a 3.7 m (12 ft. 0 in.) cutting width. This scraper works well for construction contractors bulk-hauling materials using 360-hp to 575-hp tractors.

KEY FEATURES
• Move dirt for one-third the initial investment and half the labor of alternative earthmoving equipment like self-propelled scrapers.
• Heaped capacities have been increased up to six percent, to 12.2 m3 (16.0 cu. yd.).
• Combine the fully integrated scraper system with powerful EPA Final Tier 4/EU Stage IV tractors to more ably pull larger pans.
• Integrated overflow spill guard, standard on all ejector models, increases capacity while preventing spillage.
• Redesigned hydraulic shielding better protects critical components from falling and accumulating material.
• One-year warranty is standard on all models.

HYDRAULICS
• Sequence valve coordinates hydraulic functions on ejector scrapers. Our fixed-blade ejector scrapers have three hydraulic functions: Scraper blade – lift or lower, Gate – open or close, and Ejector wall – eject or retract.
• All John Deere ejector scrapers are manufactured as front scrapers with tandem steel lines. Doing so increases the versatility of the scraper fleet by allowing all of the ejector scrapers to be connected as a front or rear scraper.
• John Deere scrapers are manufactured with one set of hoses to fit both long and short drawbar tractors. Hose options are available to hook scrapers in tandem or triple configurations.
• High-quality, all-steel, zinc-coated hydraulic lines protect from damage, leakage, and corrosion.

WHEELS AND TIRES
• The standard offset-wheel frame assembly allows high-speed finishing and stability during hauling, loading, and unloading processes.
• Scrapers solve flotation and compaction needs. Contractors race against the clock to complete projects no matter what obstacles they encounter. The most common obstacles include rain and poor soils. They require the use of dependable earthmoving equipment that's light on its tires and the land. When it comes to flotation, the John Deere scraper cannot be beat.

DRAWBARS
• John Deere Scraper drawbars are available in two styles: yoke and quick attach.
• John Deere builds many types of scraper drawbars to use when pulling John Deere scrapers. It is important to know what model tractor will be pulling the scrapers when looking for a matching drawbar. John Deere 9R Series Scraper Tractors offer three types of heavy-duty drawbar supports: track, long, and short.

BLADES
• Need to change a cutting edge? Bucket, gate, and scraper mainframe can be easily secured without tools in the raised position for servicing.
• With their wide throat opening and exclusive blade system, loading these ejector scrapers is quick and easy. Mix and match standard and long blades to fit almost any application or material condition.
• Integrated rear push bumper enables push-loading when a dozer is needed. Push block exactly matches the blade radius of John Deere dozers and provides ample tire clearance to accommodate “U” blades.
• John Deere scraper blade options include straight blade configuration, drop-center blade configuration and tooth blade configuration.
• The scraper's blade support is made of high-strength steel and features two rows of bolts spaced 6-in. apart. The 152.4-mm (6-in.) spacing provides room for John Deere's exclusive multi-segmented blades.

OPTIMIZING PERFORMANCE
• Redesigned inner wall ensures smooth, snag-free ejection for spreading controlled, consistent loads.
• Low-profile design provides a low center of gravity and good visibility to the rear scraper.
• We’ve doubled our warranty on scrapers to an industry-leading 12 months.
• All ejector scrapers deliver more payload capacity. And now you are no longer restricted from running our larger scrapers in a triple-pan configuration. That means you can haul up to 54.9 m3 (72 cu. yd.) per cycle with only a single operator and rig.
• Standard super-overflow spill guard increases capacity, while reducing carryback and tire wear. New swept-back push-wall design provides a 26-percent-larger top-loading target, for faster cycle times.
• Quick-attach rear hitch makes coupling and uncoupling a snap when conditions demand.

SHIELDING, PROTECTION AND MANTENANCE
• Rounded gate shields and swept-back super overflow spill guard protect components from falling material to prevent debris like rocks and tree roots from accumulating.
• Ejector shielding has been beefed up to better protect hydraulic lines, wire harnesses, and other critical components.
• Newly added service access panels make maintenance easier and faster than ever for the occasional repair or clean up.
• Remote grease zerk has been added for the main pivot pin boss. A more robust, solid, zinc coated, heat treated pin will replace the old tapped, grease pin.

Capacities

Struck
9.2 m3 (12.0 cu. yd.)
Heaped
12.2 m3 (16.0 cu. yd.)

Weights

Approximate Shipping Weight
10 296 kg (22,700 lb.)

Weight Distribution

Tongue
24%
Wheels
76%

Tires

20.5 – 25
Standard
Number of Tires
4

Hydraulics

Recommended, Minimum
94.6 Lpm (25 gpm) / 19 995 kPa (2,900 psi)

Dimensions

Length
8585 mm (28 ft. 2 in.)
Width
4089 mm (13 ft. 5 in.)
Height
2312 mm (7 ft. 7 in.)
Hitch/Drawbar
610 mm (24 in.)
Blade – Bowl Up
508 mm (20 in.)
Floor – Bowl Up
432 mm (17 in.)
Bowl Width
3658 mm (12 ft. 0 in.)
Bowl Length
2337 mm (7 ft. 8 in.)